Tripods and Heads

This lightweight and incredibly strong aluminium version manufactured by E.F. Moy Ltd. Comes with a stable frame that gives ample purchase for both the camera and the operator, and is easy to modify to different heights, making the Ladder Pod a perfect choice in wide variety of shooting scenarios.

• Perfect to get a static high-angle shot within budget
• The original ladder pod designed and manufactured in England
• Produced using specifically designed aluminum ladders and top casting
• Comes with three-way leveler, two standing platforms and one battery tray
• Can reach 12ft to 20ft
• Excellent for mounting on uneven or difficult areas such as shallow ponds, ocean beaches, rocky slopes and marshlands

This Heavy Duty Bazooka is an extremely stable support for full compliment 35mm camera, lens and matte box combinations. Each piece of this six-part system is rigidly locked together by means of our taper lock clamping system. The three-way leveling and sliding riser allow for easy set-up. Constructed in corrosion resistant lightweight aluminum with anodized finish ensuring maintenance free use.

The Award winning LAMBDA Nodal Head is the only Support that allows to set the nodal position with any Camera and pivoting 360° pan, tilt and roll, on the focal plan of any Camera.

The settings are achieved by graduated slides both horizontally and vertically with micrometric cranks for extreme precision. A smart system of orientable counterweight rods can be used when the slide run is not sufficient.

The LAMBDA 50 Head can be mounted on any classic support as Tripods or Dollies or used in underslung position from Cranes and Jib arms.

Optional accessories as 3rd Axis, the orientable pan bar, steering wheel, eyepiece holder and the counterweight rods complete the most versatile of supports.

The Ronford-Baker Fluid 7 head is designed for use with film or video/EFP cameras. Its two sealed fluid units allow control to be varied through seven stages, from a cushioned free movement to the heaviest control required, by the use of three simple on/off levers. Both pan and tilt actions are continuous through 360 º, depending on the length of the lens and camera. The Fluid 7 can be supplied with a variety of platform widths, quick change spacing blocks and riser plates as illustrated. The platform is adjustable for height to suit the centre of gravity of the camera in use. A second pan bar of the platform, with ratchet adjustment to suit the required height.

Technical Specifications
Operation temperature range: +150ºF to -40ºF (+60ºC to -40ºC)
Weight: 17lb 14oz (8kg) standard

The Tango Swing Head allows the camera to rotate on its gravitational center in a “Dutch” motion, 45° to the left or to the right. The Tango adds a third axis of movement allowing for a very fast and flexible balancing option, while the panoramic movement of the fluid head remains horizontal and the tilt stays vertical. The Tango can be fitted on most fluid heads, particularly industry staples such as the O’Connor 25/75 and the Sachtler Studio II. The twin support and racks improve quietness and flexibility when moving, while security is boosted with a locking position range of 90 degrees when on stand-by.

Please let us know which head your are planning on using with the Tango for confirmation of compatibility.

Mitchell “Lightweight” Geared Head developed by the Mitchell Camera Corporation in the late 1980’s. Three speed gearbox on each axis plus a built in tilt plate.

Features:

• 3 Speed gearbox on each axis
• Pan is gear drive, tilt is cable drive
• Mitchell mount
• Tilting top-plate
• Weight: 51 pounds (with handwheels)